I. Package Inclusion
：
1 main unit 8208 handheld gun
3 types of air nozzles
1 instruction manual
1 IC popper
1 power cord
II.
Features:
1.
Turbine motor generated that creates natural soft whirly air .
Best suited for reworking large SMD components, plastic
insideconnector, mobile phone speakers and others.
2.
Sleep mode sensor . The unit goes standby mode when the
handle is put back into the holder . It will turn off and release
cold air after one minute of not using . Returns to previous
setting when air gun is lifted .
III.
Operation :
1.
Plug the cord . (Make sure that the unit is free from damages
caused due to transit . If any damages are present , do not use
the product. Contact distributor immediately.)
2.
Turn on power switch (ON), cool air will start to blow once
the unit is turned on . Set temperature and air flow according
to the rework component’s size .The sensor will activate the
machine and start releasing hot air upon lifting the handset .
3.
Pay attention to the type of component being reworked when
adjusting the temperature and airflow . If working with PCB
plastic components or larger CPUs, higher temperature and
airflow is needed .
Do not let the hand held gun stay in one position , it must be
used in a rotating manner . Never let it stand focused in the
component for more than one second , at least 15mm distance
form the component necessary .
Wait until the solder starts to shimmer and completely melts,
use a tweezer to remove the component . This process is also
used when soldering .
4.
Return the handset to the holder after usage . The unit goes to
Standby mode when the handle is put back into the holder . It
will turn off and release cold air after one minute of not using
Previous setting is returned when air gun is lifted .
5.
Turn off the power switch after using .
6.
Remove power plug when unit is not going to be for a long time .
