-03-
HEAD
Gyroscope calibration
Slide right to confirm
Now, the APP interface displays the diagram (Pic 3). Place the drone on the
level surface and . The LED lights of the drone will flash
rapidly for about 3 seconds. When completed, the front and rear lights turn
solid. Or press the Gyroscope calibration switch “ ” on the remote control.
The LED lights of the drone will flash rapidly for about 3 seconds. When
completed, the front and rear lights turn solid.
Pic 2
Pic 3
Slide right to confirm
Please confirm whether horizontal
calibration is carried out
Cancel
Step 2:
Now, the APP interface displays the diagram. Hold the drone vertically and
rotate the drone in 3 complete circles. When completed, the controller
emits a “beep” sound and the drone's LED lights become solid and the
Compass calibration icon in controller screen is solid on.
Attention:
·
The Gimbal is detecting 10 seconds after compass calibration, please do
not touch the Gimbal directly, otherwise the Gimbal may damaged.
·
When it indicates “
Equipment connected (GPS Model)
” in the APP
interface, means that the drone receives the GPS signal. Now, the rear LED's
of the drone will flash twice per second.
·
Every time the drone is powered on the compass calibration should be
performed.
