12
Operating Instructions of Keys
Positioning the device
Place the device on an even surface. The position should be chosen to ensure a distance
of between 10 cm and 20 cm between the user and the device. The lamp is most effective
at this distance.
Mains connection
• To prevent possible damage to the device, the daylight therapy lamp must only be used
with the mains part described here.
• Insert the mains part into the connection provided for this purpose on the rear of the
daylight therapy lamp. The mains part must only be connected to the mains voltage that is
specified on the type plate.
• After using the daylight therapy lamp, unplug the mains part from the mains socket first
and then disconnect it from the daylight therapy lamp.
Note:
• Ensure that there is a socket near the place where the lamp will stand.
• Lay the mains cable in such a way that no one can be tripped over it.
Operation
1.
Place the therapy light on the bracket
2
. Select light mode, brightness and timer then switch on.
Ⅳ：
Enjoying the light
This SAD lamp have two color mode, white and blue, push the color mode and choose
white mode then you will enjoy sunbath at home.
①
.White Mode
Here is the instruction:
Sit as close as possible to the lamp, between 10 cm and 20 cm. You can go about your
normal activities while using it. You can read, write, make telephone calls, etc.
• Every so often, briefly look directly into the light, since the effect results from the eyes/
retina receiving the light.
• Use the daylight therapy lamp as often as you want. However, the treatment is at its
