background image

14

H

Maintaining

Our products are suitable for ASTM F963; GB6675; EN71 and EN62115 standard.

Disposal Of Battery

●  Your sealed lead-acid battery must be recycled or disposed of in an environ-

mentally sound manner.

●  Do not dispose of your lead-acid battery in a fire. The battery may explode or 

leak.

●  Do not dispose of a lead-acid battery in your regular, household trash. The 

incineration, land filling or mixing of sealed lead-acid batteries with household 
trash is prohibited by law.

•   

It  is  parents'  responsibility  to  check  main  parts  of  the  toy  before  using,  must 

regularly examine for potential hazard, such as the battery, charge,cable or cord, 

plug, screws are fastening enclosure of other parts and that in the event of such 

damage, the toy must not be used until that damage had been properly removed. 

•  Make sure the plastic parts of the vehicle are not cracked or broken.
•  Occasionally use a lightweight oil to lubricate moving parts such as wheels.
•  Park the vehicle indoors or cover it with a tarp to protect it from  wet weather. 
•  Keep the vehicle away from sources of heat, such as stoves and heaters. Plastic 

parts may melt.

•    Recharge  the  battery  after  each  use.  Only  an  adult  can  handle  the  battery. 

Recharge the battery at least once a month when the vehicle Raider is not being 

used. 

•  Do not wash the vehicle with a hose. Do not wash the vehicle with soap and 

water. Do not drive the vehicle in rainy or snowy weather. Water will damage the 

motor, electric system and battery. 

•  Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a 

non-wax furniture polish. Do not use car wax. Do not use abrasive cleaners.

•  Do not drive the vehicle in loose dirt, sand or fine gravel which could damage the 

moving parts, motors or the electric system.

•  When not using, all the electrical source should be turn off. Turn off the power 

switch and disconnect the battery connection.

Summary of Contents for 370-166V80

















Reviews: