background image

FOR THE SAFETY OF YOUR CHILD, PLEASE READ ALL WARNINGS AND 
ASSEMBLY/USE  INSTRUCTIONS.  KEEP  THIS  GUIDE  FOR  FUTURE 
REFERENCE.

●ADULT  ASSEMBLY  REQUIRED.  The  product  contains  small  parts,  which
are for adult assembly only. keep small children away when assembling.
●always  remove  protective  material  and  poly  bags  and  dispose  before
assembly.
●never leave child unattended. direct adult supervision is required.
●always keep child in view when child is in vehicle.
●Keep Children within Safe Riding Areas:
- Never  use  in  roadways,  near  motor  vehicles,  on  lawn  space,  on  or  near
steep inclines or steps, swimming pools or or any other dangerous area.
●Use  the  toy  only  on  flat  surfaces.  Such  as  inside  your  house,  garden  or
playground.
●Never  use  in  the  dark. A  child  could  encounter  unexpected  obstacles  and
have an accident. Operate the vehicle only in the daytime or a well-lit area.
●Please avoid running on sand or any other rough ground.
●always wear shoes.
●always sit on the seat.
●this toy has no brake.
●It is prohibited to change the circuit or add other electric parts
●Inspect wires and connections of the vehicle periodically.
●Do  not  let  any  child  touch  the  wheels  or  be  near  them  when  the  car  is
moving.
●This vehicle has adjustable play seat belts. Please instruct children how to
tie the safety belt before using, guarantee the security.

SPECIFICATIONS:

Battery

Motor:

Suitable ages:

Maximum weight:

Speed :

Power way:

Use of time:
Charger:

Charging type
Charg: 

 hours ; Use: 

2 hours

8-12

1-

Input AC 110 V~240, output DC12V

mA

 

 1000

WARNING

1.The pictures in this instruction is only for explaining the operation and
structure  of  the  product,  when  there's  any  difference  with  the  real
product, please confirm with the real product.
2.In  order  to  improve  the  quality  of  the  product,  we  may  amend  some
structure or appearance of the product without notification. Thank you for
your understanding.

12V

10

AH *

1

37

-

96 months

30KG

3

-

6KM

/

h

2*555(120W)

User Notice │ 

1

Summary of Contents for 370-149V80

























Reviews: