RGB FUSION 2.0
With 16.7M customizable color options and numerous
lighting effects, you can choose lighting effects or
synchronize with other AORUS devices
.
For motherboard’s V,D,G pin
For motherboard’s V,D,NP,G pin
For 2.5” Cage
Install the internal 2.5” SSDs & 3.5” HDDs
For 3.5” Cage
Screw - A
Screw - B
Screw - C
Standoff – 6.5mm
Cable Tie
PSU
Motherboard(12) / SSD(40) / GPU (2)
HDD
Motherboard(9, pre-installed)
8
54
8
4
8
Cable management
Maximum compatibility
Support vertical and horizontal graphics card installation
Install the vertical graphics card
Requires the PCIE riser cable (not included)
*Plug the PCI-E riser cable before installing the graphics card.
Install the power supply
PSU
PSU
PSU
SSD
HDD
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
3.5”
3.5”
3.5” HDD can be replaced by 2.5" SSD.
The 3.5” drive bay can be disassembled
when the users need more space for
installing the radiator or PSU.
Please use the included hub (refer the below image) to connect
the ARGB and PWM fans.
Users can control the RGB & Fan speed on the top I/O panel.
Mode Button: Adjust the modes between RGB FUSION 2.0.
RGB Button: Adjust the various colors.
FAN ± Button: Adjust the fan speed by each level.
PSU
5V 3pin ARGB connector
VDG
ARGB for chassis light
5V 3pin ARGB
ARGB FAN
ARGB FAN
POWER (Molex)
FAN SW+
FAN SW-
RGB SW1
RGB SW2
PWM
FAN
MB
FAN
Screw - B
Screw - A
Screw - B
Screw - B
Screw - B
MB
USB
