29
5: Operation
This section describes operational test you can perform to make sure your
AR570
is connected
and operating properly. This section is also describes the function of each controls indicators and
jack, as refer to the illustration below.
Front View
Rear View
5-1: Operational Tests and Adjustment
5-1-1: Telephone Equipment
5-1-1-1: Acquire image, image transmission and reception
Make sure you have the
AR570
connected to a suitable power source by a supplied DC power
cord with a DC plug.
(Be carefully the polarity on the terminal of the power source.)
Also make
sure you have the
AR570
connected to your telephone line
(TEL)
, video capturing device
(VIDEO
IN)
and video display device
(VIDEO OUT)
as described
in the section of 4 Installation, on page
12 of this manual.
①
Select transmission mode by
MODE-SW
Dip switch provided on the bottom of the
AR570
(Refer to the section of 3-3-1: Mode Switch, on page 12 of this manual.)
