16
&&&&&
Netmask
(Current netmask)
F: Netmask valid
0: Netmask invalid
$
Communication mode
(Displays the communication mode on the channel)
0: Non encryption mode
1: Digital squelch mode
2:
Fixed encryption mode
3: Random encryption mode
! ! ! ! ! Other party’s ID (Set other party’s ID)
I D: 00000 ~ 99999
@@@@@ Netmask (Set netmask valid / invalid)
Enter “1” or “0” to each digit.
1: Netmask valid
0: Netmask invalid
[Note: On the PC screen, “1” will be displayed as “F.”
X X Setting mode 80: Non encryption mode
00: Fixed encryption mode
40: Fixed airkey random encryption mode
50: Random encryption mode
Z Z Algorithm Set communication algorithm
[Note: When the communication mode is set to Non Encryption mode
(80), then the algorithm must be set to either [ 0 0 ] or [ 01] .
00: Non encryption mode (default)
01: Digital squelch mode
[Note: When the communication mode is set to Fixed Encryption
mode (00) or Random Encrption mode (40, 50), then the
algorithm must be set as follows:
00 ~ 79: Fixed Scramble Code
80 ~ 99: Variable Scramble Code (every 20 mS)
[Note: When you execute the ACP command, it will not display detailed communications settings or
algorithm values. If you wish to adjust detailed settings, use the ADS command in the
system management mode.
