23
10/100 LAN Supported
On the strength of Realtek RTL8100C LAN controller on board, this motherboard
provides 10/100 Ethernet for office and home use. The Ethernet RJ45 connector
is located on the top of USB connectors. The right hand side LED indicates link
mode; it lights in yellow when linking to network. The left hand side LED indicates
the transfer mode and will light in green when data is transferring at 100Mbps
(never lights while at 10Mbps). To enable or disable this function, you may simply
adjust it through BIOS. To enable LAN wakeup function, you have to set the
“Wake on PCI Card” enable in the BIOS “Power Management Setup” section.
Speed LED (Left)
Green 100Mbps
ACT LED (Right)
Yellow
