AUD FPOUT R
AUD_GND
AUD RET L
KEY
JS/AUD RET-R
AUD VCC
AUD MIC
AUD MIC BIAS
NC
AUD FPOUT L
Connector
Pin1
Pin2
Pin3
Pin4
MODEM-CN
Mono In GND GND Mic Out
CD-IN
Left
GND GND
Right
12. Connecting CD / MODEM Connector
10. Front Audio Connector
If the housing has been designed with an audio port on the front panel, you’ll be able to
connect onboard audio to front panel through this connector. By the way, please remove
5-6 and 9-10 jumper caps from the Front Audio Connector before connecting the cable.
Please do not remove these 5-6 and 9-10 yellow jumper caps if there’s no audio port on
the front panel.
The
MODEM-CN
connector is used to connect
Mono In/ Mic Out cable from internal modem card to
onboard sound circuit.
The
CD-IN
connector is used to connect CD Audio
cable from CDROM or DVD drive to onboard sound.
CD-IN (Black)
MODEM-CN (Red)
Pin 1
13. Installing LAN Driver (Optional)
The South Bridge in Intel 845 (Brookdale) chipset integrates a total communication solution including
10/100Mb Fast Ethernet for Office requirement. You can install LAN Driver under Windows95/98,
WindowsNT & Windows2000 by following steps.
Manually Adding an Adapter in Windows 95 / 98
=====================================
LOCATION OF DRIVER: \Intel\Driver\Lan\E100BNT5.SYS (NDIS 5.0)
LOCATION OF SETUP FILE: \Intel\Driver\Lan\NET82557.INF
1. From the Control Panel, double-click the “Add Hardware” icon.
2. Double-click Other Devices or Network Adapters in the list area.
3. Double-click a PCI Ethernet Controller.
4. Click the Driver tab, then click Update Driver.
5. Click Next at the Update Device Driver Wizard.
6. Select "Display a list of all the drivers..." and click Next.
7. Insert the AOpen Bonus CD and click Have Disk.
8. Enter the appropriate drive for your disk media
(for example: D:\) ,and click OK.
9. Click OK at the Select Device dialog box.
10. The Update Wizard displays the message that it has found
the driver. Click Next.
11. Click Finish and restart your computer when prompted.
Note:
If the New
Hardware Found
dialog box does not
appear at startup and
you cannot connect to
the network, check the
Device Manager list to
see if the new adapter
is present. If it is not,
please install the LAN
driver manually.
11. Support 10/100 Mbps LAN onboard (Optional)
Green/ACT
Orange/Speed
Intel 845 (Brookdale) chipset includes a fast Ethernet controller on chip. On the strength
of Intel 82562ET PHY on board, which is a highly-integrated Platform LAN Connect
device, it provides 10/100M bps Ethernet for office and home use, the Ethernet RJ45
connector is located on top of USB connectors. The green LED indicates the link mode, it
lights when linking to network and blinking when transferring data. The orange LED
indicates the transfer mode, and it lights when data is transferring in 100Mbps mode.
