In fact, a hard disk is a very fragile and delicate device though it is covered with robust metal.
During the process, any slight vibration might damage it. Hence, be sure to get it locked in the
frame securely. You must screw the hard disk securely on both sides of the frame.
Don't mess up screws!!
Generally there are special screws for a hard
disk in the parcel when you buy a new hard
disk. If no screws are attached, use those
packed in the accessory parcel. Make sure
to use the NO.2 screws. (See page 2-3)
Pack the HDD / FDD frame back to the housing
Put the frame back to the housing and fix it securely to complete this step. It's pretty simple:
Just aim two tenons on the frame at the housing and the other one on the top of the frame.
Then push it to the opposite direction. You will hear a clipped sound.
Tenon 1
Tenon 2
Tenon 3
2-9
Start To Handle
