AOpen FM56, Manual, Page: 7 / 127

3.5 RESULT CODES
3.5.1 General
3.5.2 Description of Result Codes
3.6 AUDIOSPAN AND DSVD
3.6.1 Commands
3.6.1.1 -SSE - Enable/Disable DSVD
4. FAX COMMANDS
4.1 FAX I/O PROCESSING
4.1.1 DTE-to-Modem Transmit Data Stream
4.1.2 Modem-to-DTE Receive Data Stream
4.1.3 Fax Mode Selection
4.1.4 Fax Origination
4.1.5 Fax Answering
4.1.6 Fax Control Transmission
4.1.7 Fax Control Reception
4.1.8 Fax Data Transmission
4.1.9 Fax Data Reception
4.2 COMMANDS AND PARAMETERS
4.2.1 Commands
4.2.1.1 +FCLASS=1.0 or +FCLASS=1 - Select Facsimile Class 1
Mode
4.2.1.2 +FAE - Auto Answer Enable
4.2.1.3 +FTS - Transmit Silence
4.2.1.4 +FRS - Receive Silence
4.2.1.5 +FTM - Transmit Facsimile
4.2.1.6 +FRM - Receive Facsimile
4.2.1.7 +FTH - Transmit Data with HDLC Framing
4.2.1.8 +FRH - Receive Data with HDLC Framing
4.2.2 Service Class 1 Parameters
4.2.2.1 +FAR - Adaptive Reception Control
4.2.2.2 +FCL - Carrier Loss Timeout
4.2.2.3 +FDD - Double Escape Character Replacement
4.2.2.4 +FIT - DTE Inactivity Timeout
4.2.2.5 +FPR - Fixed DTE Rate
4.2.2.6 +FMI - Request Manufacturer Identification
4.2.2.7 +FMM - Request Model Identification
4.2.2.8 +FMR - Request Revision Identification
4.2.2.9 +FLO - Flow Control
4.3 EXAMPLES
5. VOICE COMMANDS
5.1 Voice Commands Overview
5.2 Voice Commands
5.2.1 Configuration Commands
5.2.1.1 +FCLASS=8 - Select Voice Mode
5.2.1.2 +FCLASS=80 - Select VoiceView Mode
5.2.1.3 +VCID - Caller ID (CID)
5.2.1.4 +VDID - DID
5.2.1.5 +VNH - Automatic Hang-up Control