manualshive.com logo in svg

AOpen ehw-5224u, Manual, Page: 15 / 23

Share
Download
AOpen ehw-5224u Manual Download Page 15

Specification                                                                                                                    English 

 

-- E-13 --

5. 

Technical Support 

For additional information or help during installation or normal operation of this drive not 
available in this manual or from our Web site, please contact our dealer where you have 
purchased this product for support. 
 
 
 

5.1. 

Firmware Upgrade 

The USB2.0 CD-RW drive uses Flash type firmware, a small piece of software that can 
be overwritten and updated. To ensure more reliable operations and enhanced 
performance of the drive, updates to the firmware will be made available. You can 
download and upgrade the latest version via our Web site regularly. 

   

Confirming the firmware version 

The Windows 9x users can confirm the firmware version on USB2.0 CD-RW drive 
property with Device Manager. 

 
 
 
 
 
 
 
 
 
 

 
For Windows 2000 users, the firmware version will not be displayed. Use your writing 
software to check it. 

Summary of Contents for ehw-5224u
























Reviews:

No comments