AOpen AP43, User Manual

Page: 54 / 89

AMI BIOS
User’s Guide
3-9
System Boot-up Num Lock
Setting this parameter to
On
enables the numeric function of the
numeric keypad. Set this parameter to
Off
to disregard the function.
Disabling the numeric function allows you to use the numeric keypad
for cursor control. The default setting is
On
.
Numeric Processor Test
This parameter is non-configurable and auto-detected by the system.
If the CPU in use is a DX CPU, this parameter is automatically set to
Enabled
.
However, for the SX CPU, the setting is changed to
Disabled
.
This is because the SX CPU does not have an
integral numeric coprocessor.
Floppy Drive Seek at Boot
When enabled, the BIOS detects whether there is a floppy disk drive
installed. Disable the parameter to bypass the function.
Floppy Drive Swapping
This parameter allows you to swap floppy drives. For example, if you
have two floppy drives (A and B), you can assign the first drive as
drive B and the second drive as drive A or vice-versa. Disable the
parameter to bypass the function. The default is
Disabled.
System Boot-up Sequence
The settings are C:,A: and A:,C: to specify the system search
sequence. The default setting is
A:,C:
.