15
INTERNET BROADBAND ROUTER CONFIGURATION
First make sure that the network connections are functioning normally.
This Internet Broadband Router can be configured using Internet
Explorer 4.0 or newer web browser versions.
Login to the Internet Broadband Router
Before you configure this device, note that when the Broadband
Router is configured through an Ethernet connection, make sure the
host PC must be set on the
IP subnetwork
that can be accessed by the
xDSL/Cable modem. For example, when the default network address
of the xDSL/Cable modem Ethernet interface is 192.168.1.x, then the
host PC should be set at 192.168.1.xxx (where xxx is a number
between 2 and 254), and the default subnet mask is 255.255.255.0.
1.
Open Internet Explorer 4.0 or above Internet browser.
2.
Enter IP address
http://192.168.1.1
(the factory-default IP
address setting) to the URL web address location.
3. When the following dialog box appears, remain blank (first login)
or enter the password and press Login to enter the main
configuration window.
Note: If needed to set a password, then refer to the
Administrator Setting
.