8
In Infrastructure mode, the Wireless Adapter will automatically detect the channel
number of the Access Point.
Security:
the setting of the Network Encryption.
This function is used to protect wireless communication from eavesdropping. A
secondary function of encryption is to prevent unauthorized access to a wireless
network, and it can be achieved by using the Encryption function.
Click the Enable Encryption to activate the security of the Wireless Adapter.
Key Setting #1 ~ #4:
You can type the key that you want to use from Key#1 to Key #4, and the key that
you type will be the encryption between the station that you connected with, if you
select 64bit in Hex format, you must type 10 values in the following range (0~F,
hexadecimal), or 64bit in ASCII format, you must type 5 alphanumeric values in
this field. Besides, if you select 128bit in Hex format, you must type 26 values (0~F,
hexadecimal), or 128bit in ASCII format, you must type 13 alphanumeric values.
Be sure that the Wireless Adapter and the wireless station was set in the same key.
Create with Passphrase:
The Passphrase in the dialog box helps you to create a group of WEP key in the
Key Setting, while input a phrase in the Passphrase dialog, you can see the group of
key setting will be changed.
Note: After all the settings are completed, click Apply to save the setting.
