After you finish the setting of jumpers and connect correct cables. Power on and
enter the BIOS Setup, press <Del> during POST (Power On Self Test). Choose
"Load Setup Defaults" for recommended optimal performance.
15. Power-on and Load BIOS Setup
16. AOpen Bonus Pack CD
You can use the autorun menu of Bonus CD. Choose the utility and driver and select
model name.
Del
Warning: Please avoid of using "Load
Turbo Defaults", unless you are sure
your system components (CPU,
SDRAM, HDD, etc.) are good enough for
turbo setting.
The “CASE OPEN” header provides case open-monitoring function. To make this function work,
you have to enable it in the system BIOS, connect this header to a sensor somewhere on the
case. So, whenever the sensor is triggered by lights or when you open the chassis, the system
will send out beep sound to inform you. Please be informed that this useful function only applies
to advanced chassis. You may purchase an extra sensor, attach it on your chassis, and make a
good use of this function.
14. Case Open Connector
17. BIOS Upgrade under Windows Environment
You may accomplish BIOS upgrade procedure with EzWinFlash by the following steps,
and it’s STRONGLY RECOMMENDED to close all the applications before you start the
upgrading.
1. Download the new version of BIOS package zip file from AOpen official web site. (ex:
http://english.aopen.com.tw
)
2. Unzip the download BIOS package (ex: WAK79D4001394102.ZIP) with WinZip
(
http://www.winzip.com
) in Windows environment.
3. Save the unzipped files into a folder, for example, WAK79D4001394102.EXE &
WAK79D4001394102.BIN.
4. Double click on the WAK79D4001394102.EXE, EzWinFlash will detect the model
name and BIOS version of your motherboard. If you had got the wrong BIOS, you
will not be allowed to proceed with the flash steps.
5. You may select preferred language in the main menu, then click [Start Flash] to start
the BIOS upgrade procedure.
6. EzWinFlash will complete all the process automatically, and a dialogue box will pop
up to ask you to restart Windows. You may click [YES] to reboot Windows.
7. Press <Del> at POST to enter BIOS setup, choose "Load Setup Defaults", then
“Save & Exit Setup”. Done!
It is strongly recommended NOT to turn off the power or run any application during
FLASH PROCESS.
Pin 1
1
Sensor
GND
