Power on and off
Auto
Power
ON/OFF
The
earphones
are
turned
on
automatically
when
you
take
them
out
from
the
charging
case.
A
“Power
On”
message
is
heard,
and
the
LEDs of the earphone flash blue for second.
The earphone power off and are being charged automatically once the earphones are inserted
into the charging case.
Note
·Auto
Power
ON/OFF
in the charging case
will
not
work
when
the
charging
case
is
out of power.
·The earphone automatically power off if they do not find a paired Bluetooth device within 90
seconds or if they are connected via Bluetooth but no audio playback for approx. 3 minutes.
Manual
Power
ON
Touch and hold the right and left touch control pane
l for second, the voice prompt ”power on” is
heard, the LEDs of the earphone flash blue for second.
Using
the
earphones
Pairing
When
you
use
the
earphones
for
the
first
time,
follow
the
procedure
below
to
pair
them.
1.
The
earphones
are
turned
on
automatically
when
you
take
them
out
from
the
charging
case.
Or turn the earphones on manually by touching and holding the right and left touch control
panel for second, the
voice prompt ”power on” is heard, and the LEDs of the earphone
flash blue for second.
2. The left and right earphone are paired automatically, a
“Dong, dong”
signal tone is heard.
When the
earphones
start
pairing
with
a
Bluetooth®
device, a
“Pairing”
message
is
heard,
the LEDs of earphone
flash blue and red
quickly.
The voice prompt “Pairing success” is heard
when the left and right earphone are paired for the first time.
3.
Activate
Bluetooth®
on
your
Bluetooth
device
and
search
for
“B217”.
Select
“B217”from the list of found Bluetooth devices
to
complete
pairing. If necessary,
enter the default pin code “0000”. If pairing was successful, you hear the voice prompt
”Connected” and the LEDs of the earphones
turn off.
