AOMWAY Commander V1S, User Manual

Page: 12 / 15

AOMWAY 12 VISION SYSTEMS
WWW.AOMWAY.COM
Note:
1)
Most HD display problem is caused by cable or
connector’s quality issue. If you find HD input wrong, please
check HD input source or replace the cable.
2)
When switch to HD 2D/3D mode, RF modules will be
automatically deactivated to avoid input signal conflict.
8. AV IN / OUT

AV cable using standard 3.5mm 4 ‐ pole AV jack connector;

Yellow: Video, White: Audio Left, Red: Audio Right,
Shielding Cover: Ground;

AV in and AV out are passing through the same port. To
use AV in mode, need to switch off RF, otherwise there is a
conflict;

Earphone jack supports standard 3.5mm 3 ‐ pole audio jack
connector; volume can be adjusted by adjustable earphone.
9. LENS INSERTS:
On the goggles, corrective lens insert slots are available and you
may insert ‐ 2, ‐ 4 or ‐ 6 lenses in the market directly for use. Need to
remove foam cover first, and then insert left and right lens into
the slots.