background image

USE AND MAINTENANCE MANUAL

Page 5 of 14

®

 

WARNING

The equipment original configuration must not be modified in any way.
On receiving the equipment make sure that:

The packaging is intact and undamaged.

The supply corresponds to what has been ordered.

In case of damage please call 

A.O.M.- AMERICA

INFORMATION LETTER

The following maintenance and instruction manual is an integral part of the machine and
must always be available to the personnel in charge of using and maintaining it. The operator
and the personnel in charge of handling the machine must have knowledge of the contents of
the manual. The descriptions and illustrations in the manual are not to be considered as
binding. Although the main features of the machine described in this manual are not subject
to change,   

ASTURO ORIGINALI MAVES

 

Spa

   reserves the right to change those

components, details and accessories it deems necessary  to improve the machine or  to
meet manufacturing or commercial requirements, at any timeand without updating this manual
immediately.

 

WARNING 

ALL RIGHTS ARE RESERVED.

 The reproduction of any part of this manual, in any given

form, without prior written authorization from 

ASTURO ORIGINALI MAVES

 

Spa

, is strictly

forbidden. The content of this manual can be modified without prior notice.

 

Great care has

been taken in collecting and checking the documentation contained in this manual in order to
make it as complete and comprehensible as possible. 

 

ASTURO ORIGINALI MAVES

 

Spa

machines are not designed to function in  areas at risk of fires and/or explosions. For problems
or information call 

A.O.M.- AMERICA

 customer care technical service or your local dealer.

CUSTOMER CARE TECHNICAL SERVICE

A.O.M.- AMERICA,

 LLC

54 S. Commerce Way, Suite 180

Bethlehem, PA  18017  USA

TEL. 800-533-6254 or  610-954-5530

FAX. 610-854-5532

SITE: www.aomspray.com

E-MAIL: [email protected]

Summary of Contents for K90

















Reviews: