USE AND MAINTENANCE MANUAL
Page 10 of 13
®
(1)
(2)
(B)
(A)
(4)
3.1
INSPECTION OF PURCHASED PRODUCT
Inspect the spray gun before its use to check for damages caused by transportation or
improper storage. Make sure that all standard and optional components have been delivered.
3.2
INSTALLATION CONDITIONS
It is advisable to use dry compressed air to obtain the
best painting results.
To mount the hoses proceed as follows (use the drawing
below):
+
Connect the air inlet hose (RED hose) to the spray
gun 1/4” nipple (
A
). The compressed air must come
from a normal compressor with an operating pressure
of 4 bar (60 psi).
+
Connect the paint inlet hose to the spray gun
connection (
3
).
+
Select the most appropriate nozzle.
WARNING
Before you start using the equipment, make sure the
connections and hoses are in perfect working conditions,
that is without holes, bends or splits .
3.3
HOW TO USE THE SPRAY GUN
+
Adjust the fan with the regulator knob (
1
) (if the knob
is opened the fan becomes wider, if the knob is
closed the fan gets narrower).
+
Adjust the fan position by rotating the air cap (
B
).
+
Gradually open the fluid passage by turning the fluid
regulator knob (
2
) until the desired quantity is
obtained. Check the regulation on a smooth trial
surface until the desired fan width is obtained.
FAN POSITION
CAP
(3)
AOM
BR
P
