3
At least use 2 safety ropes to install light (height almost 100cm), and ropes must be able to carry
tenfold weight of light.
Child & non-professional do not touch light fixture! Professional should watch over light when it
using.
This light could not maintained by user, except bulb & protective tube, repairing & maintaining must
follow authorized dealer.
If customer change light setting privately, or operate light by non-professional privately, both may
cause damage to light or injure yourself & property. Any damage caused by improper use will not be
assumed by the manufacturer.
Operating provisions
This Beam moving head light is available for stage show, discotheque and other amusement places. It
use 90V-260v 50Hz/60Hz current and only for indoor use.
Please familiar with its specification before operate the light fixture. Check the light appearance &
housing carefully, to confirm whether it install stability or screws tight or not.
Please do not shake the light fiercely when install or operate which should avoid force.
When move the light, should raise its handle beside bottom to avoid strike other part. Especially do
not raise its head or rocker because improper operate will damage light.
The light should prevent to be exposing under too heat, wet or dust environment during install, and
do not lay too many cord around light, otherwise it may endanger yourself or others.
Keep the distance at least 1 m between light and receiving surface.
Whatever install, uninstall or repair, please insure enclose the light bottom properly.
At lease use 2 safe cords and safe cord can not use the same lifting hole with light hook.
Environment temperature can not higher 45
°
C, otherwise bulb will turn off and light also stop work 5
minutes.
Not allow non-professional operate light because most of damage to light due to this
non-professional operate.
If light need shipment transport, please use original packing include box and polystyrene.
Forbid to change any light setting with no authorization for security consideration.
Operate light in other way which different to this manual declaration, light may suffer damage, and
cause its quality invalidation. Even this may induce short circuit, burning or shut down etc.
Please DO connect the Groundwire. Otherwise the user should bear all aftereffects.
