4
L-C2-360
REV 3 - 1812041115
C A R E & C L E A N I N G
C A R E & C L E A N I N G
By following these recommendations, you will enjoy the beauty
and convenience of your unit for many years to come.
STAINLESS STEEL
As needed, use a grill cleaner (or a soapy water solution) and
a clean cloth to remove grease and dirt from the outside of the
unit. For tough deposits, a copper pad can be used. Always
wipe with the grain. Rinse and dry completely. Then follow up
with a stainless steel cleaner and a clean cloth.
If this routine cleaning is not performed, the stainless steel
may become dull and develop surface rust (due to use and
atmospheric conditions). If left uncleaned, signifi cant damage
and pitting may occur.
Important:
DO NOT use steel wool, any other metal tools,
or any other cleaners/chemicals to clean the
exterior other than recommended above. Such
items promote rust.
When this unit is installed in a corrosive environment such
as near the ocean (salt air), poolside (chlorine and/or pool
chemicals) or any other location with exposure to high salt/
chloride content or corrosive chemicals/solutions, it will be
more susceptible to corrosion and MUST be maintained/
cleaned more frequently.
• DO NOT store any corrosive chemicals (chlorine,
hydrochloric acid, fertilizer, etc.) near your stainless steel
unit.
• DO NOT allow any corrosive materials (masonry dust,
debris, etc.) to settle on your stainless steel unit.
• These environments, chemicals, and materials may
cause the 304 stainless steel to develop surface rust and
consequently pitting. Under these conditions the unit MUST
be cleaned at least monthly. Inspect your unit often and
clean accordingly.
Fig.
4-1
Wipe with grain
Stainless
steel shown
