AOC TV1764W-2E Series, Service Manual, Page: 13 / 79

TV1764W-2E
13
3. D-SUB PIN DISTRIBUTION
This procedure gives you instructions for installing and using the LCD TV display.
1. Position the display on the desired operation and plug the power cord into a convenient AC
outlet. Three-wire power cord must be shielded and is provided as a safety precaution as it
connects the chassis and cabinet to the electrical conduct ground. If the AC outlet in your
location does not have provisions for the grounded type plug, the installer should attach the
proper adapter to ensure a safe ground potential.
2. Connect the 15-pin color display shielded signal cable to your signal system device and lock
both screws on the connector to ensure firm grounding. The connector information is as
follow:
15 - Pin Color Display Signal Cable
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1. RED Video 9. No Pin
2. GREEN Video 10. Sync Ground
3. BLUE Video 11. Not Used
4. Not Used 12. Serial Data for DDC
5. Ground 13. HORIZ. SYNC
6. Ground-R 14. VERT. SYNC
7. Ground-G 15. Serial Clock for DDC
8. Ground-B
3. S-Video ( Y /C ): TV rear side : 4 pin Mini-DIN female
SCART: TV rear side : SCART female(Red/Green/Blue)
TV: TV rear side : IEC type female
AV: TV rear side : RCA female (Yellow )
Audio:
TV rear side : RCA female (Red / White )
PC Input audio: 3.5mm Stereo female
Audio Input for AV, S-Video, SCART : RCA female ( Red / White )
Headphone 3.5mm female
Audio line Out ( to another speaker ) : RCA female ( Red / White )
4. Apply power to the display by turning the power switch to the "ON" position and allow about
ten seconds for Panel warm-up. The Power-On indicator lights "GREEN" when the display is
on.
5. With proper signals feed to the display, a pattern or data should appear on the screen,
adjust the brightness and contrast to the most pleasing display, or press auto-adjust to get
the best picture-quality.
6. This TV (with PC function) has power saving function following the VESA DPMS. Be sure to
connect the signal cable to the PC.
7. If your TV requires service, it must be returned with the power cord.
1
6
11 15
5
10