AOC LM2028
Page 5 of 66
3. OPERATING INSTRUCTIONS
3.1 GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the
monitor. By changing these settings, the picture can be adjusted to your personal preferences.
-
The power cord should be connected.
-
Connect the video cable from the monitor to the video card.
-
Press the power button to turn on the monitor, the power indicator will light up.
3.2 ADJUSTING THE PICTURE
The description for control function:
Main Menu
Item
Main Menu
Icon
Sub Menu Item
Sub Menu
Icon
Description
Adjust
Range
Reset Value
Contrast
Contrast from Digital-register.
0-100
Recall Cool Contrast
Value
Luminance
Brightness
Backlight Adjustment
0-100
Recall Cool
Brightness Value
Focus
Adjust Picture Phase to reduce
Horizontal-Line noise
0-100 Do
Auto
Config
Image Setup
Clock
Adjust picture Clock to reduce
Vertical-Line noise.
0-100 Do
Auto
Config
H. Position
Adjust the horizontal position of
the picture.
0-100 Do
Auto
Config
Image
Position
V. Position
Adjust the vertical position of the
picture.
0-100 Do
Auto
Config
Warm N/A
Recall Warm Color Temperature
from EEPROM.
N/A
Cool N/A
Recall Cool Color Temperature
from EEPROM.
N/A
User / Red
Red Gain from Digital-register.
0-100
Color Temp.
User / Green
Green Gain Digital-register.
0-100
The Color
Temperature will be
set to Cool.
The User R/G/B
value(default is 70)
will not be Modified
by Reset function in
英华家电维修资料专用 QQ:505966338
