Method 2
：
Keep pressing VOL+ and CH+ keys on the machine panel, power on the machine, the standby light flashes
quickly after about 5 seconds, standby light extinguish and turn into lighting after about a minute, means that the upgrade
is completed.
3.3. Notice
：
①
. When the machine Upgrading (U disk light flash), do not remove U disk or switch off the power, otherwise it will
destroy the software and lead can not upgrade.
②
. The machine must be power off when inserted or pulled out U disk, to avoid U disk or damage the machine.
4
、
When cannot upgrade in accordance with the step two, or upgrade failed, can only ISP upgrade, please refer to the
following instructions.
ISP to upgradetools and materials
（
When mainboard can not use USB interface to upgrade
）
:
*
Personal computer
（
WINDOWS XP system,USB2.0
）
*
AC100~240V
power supply and power cord
*
ISP
burning board
*
Drivers for ISP burning board ISP
*
ISP_Tool_XC_V1.10.exe
*
VGA cable
*
VGA EDID and HDMI EDID data file
(1). Connect the ISP burning board and TV VGA port with VGA cable.
Summary of Contents for LE58F1351
Page 22: ......
