Model
Document No.
Version
Panel
Effective from
Date Updated
NO
Amount
Diagram
Tool Parameters
1
7B11-031013-00105111
3
Electric screwdriver
2
7B11-0412D6-20105111
1
4
±
1kgfcm
3
7B11-0306A6-00105111
15
Ф
3
×
6mm flat-head black-zinc-plated machine screws
4
7B11-030616-00105111
2
5
Prepared by
Reviewed by Approved by
Lin Liangjun
Project Controlled Seal
Recent
Modification
Record
Station Name
Back Cover Disassembling-1
Notice
1. Wastes produced by this station shall be placed in the assigned position. Refer to
Waste Classification and Disposal List
.
2. Install screws by the serial number (install one by one) and abnormalities such as screws being neglected, tilted and slipped are not allowed.
Take down the 1PCS
Φ
4
×
12 screws with an electric screwdriver.
Take down the 15PCS
Φ
3
×
6 screws with an electric screwdriver.
Take down the 2PCS
Φ
3
×
6 screws with an electric screwdriver.
Take down the 3PCS
Φ
3
×
10 screws with an electric screwdriver.
Section/Serial No. Unit Assembly 02
Part Number
Descriptions
Operations and Requirements
When finished, step on the switch with your foot to send the product to
next station.
Figure:
Φ
3
×
6 countersunk-head black-zinc-plated machine
screws
Φ
4
×
12mm round-head black-zinc-plated machine
screws with spring washers
Φ
3
×
10 countersunk-head pointed-tail black-zinc-
plated tapping screws
Please read and understand the
operating instructions carefully
2
