(5).In burning interface, click "Run" to burn. Burning prompt bar will prompt burning process related information, about
12 seconds appear "Pass", and there is no longer any character rolling in prompt bar, means that is burning successfully.
(6). Shut down the power of jig, pull out the burning wire to complete burning operation. It not allow pulling out the
wires during burning process. Shut down the power when installing or taking mainboard.
(7). It not allow pulling out the wires during burning process. Shut down the power when installing or taking mainboard.
Pull out the power cord of machine first, then pull out burning board. When burning complete, change the TV and click
Run
button to burn next machine.
6
、
When upgrading complete, it must be adjusted before leave factory
：
