AOC LC32W033M, Service Manual

Page: 7 / 164

7
2.2 To Use the Menus
Power on and off
Press the power button at your TV set or remote controller to turn on your TV.
Reminder
1. Your TV set continues consuming powers at a very low consumption rate. When you will not use it for extended
period of time, disconnect the power cable between the TV set and power socket.
2. When the remote control is not available and if you want to turn on your TV set from the standby mode, please
press the CH+/- key or the source key at its side.
3. When turning your TV set off with the power switch of your TV set, it enters the power saving mode and displays
red light. You can turn on your TV set only with its power switch.
Switch between input sources
You can select signal sources to your AOC TV set directly with your remote controller. You can also press the
Source
key in the display menu to select signal source.
1) Directly select the input signal sources by using
.
2) Select signal source with the
Source
key:
1 Source Press the
Source
button to display source menu
2
Press the / button to select desired input source.
Input source contains: TV, COMP, VGA, HDMI 1, HDMI 2, AV IN 1, AV IN 2/S-video, USB.
3 Press the
OK.
Note: Source key does not work when the input is USB.