4.
Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for
your monitor is completed. The monitor can be used as is.
If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue".
5.
Click "Update Driver..." in the "Driver" tab.
6.
Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device
drivers on my computer".
7.
Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive
F:\Driver (CD-ROM Drive).
8.
Select your monitor model and click on the 'Next' button.
9.
Click
"Close"
→
"Close"
→
"OK"
→
"OK" on the following screens displayed in sequence.
43
Summary of Contents for I2477FWQ
Page 15: ...4 Click DISPLAY 5 Set the resolution SLIDE BAR to Optimal preset resolution 15...
Page 17: ...5 Set the resolution SLIDE BAR to Optimal preset resolution 17...
Page 19: ...5 Click Display Settings 6 Set the resolution SLIDE BAR to Optimal preset resolution 19...
Page 33: ...LED Indicator Status LED Color Full Power Mode Blue Active off Mode red 33...
