AOC I2280SWD User Manual Download Page 56

 

56 

 

Regulation 

FCC Notice 

 

FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) 

 
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following measures: 
 
Reorient or relocate the receiving antenna.   
Increase the separation between the equipment and receiver.   
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.   
Consult the dealer or an experienced radio/TV technician for help.   

 

 

NOTICE : 

 
The changes or modifications not expressly approved by the party responsible for compliance could void the user's 
authority to operate the equipment.   
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.   
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this 
equipment. It is the responsibilities of the user to correct such interference. It is the responsibility of the user to 
correct such interference 
 

Energy Star 

 

ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, AOC International (Europe) BV and 
Envision Peripherals, Inc. have determined that this product meets the ENERGY STAR® guidelines for energy 
efficiency.  
(FOR EPA CERTIFIED MODELS)   
 
 
 

Summary of Contents for I2280SWD



































































Reviews: