24
OSD Setting
Basic and simple instruction on the control keys.
1) Press the
-button
to activate the OSD window.
2) Press
< or >
to navigate through the functions. Once the desired function is highlighted, press the
-button
to activate it . press< or >to navigatethrough the sub-menu functions.Once the desired function is highlighted,
press
-button
to activate it.
3) Press< or >to change the settings of the selected function. Press
to exit. If you want to adjust any other
function, repeat steps 2-3.
4) OSD Lock Function: To lock the OSD, press and hold the
button
while the monitor is off and then press
button
to turn the monitor on. To un-lock the OSD - press and hold the
button
while the monitor is off
and then press
button
to turn the monitor on.
Notes:
1) If the product has only one signal input, the item of "Input Select" is disable to adjust.
2) ECO modes(except Standard mode), DCR, DCB mode and Picture Boost, for these four states that only one
state can exist..
Summary of Contents for G2460VQ6
