AOC E936VW -, Service Manual

Page: 6 / 55

18.5" LCD Color Monitor AOC e936Vw
6
3. Operating Instructions
3.1 General Instructions
Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the
monitor.
By changing these settings, the picture can be adjusted to your personal preferences.
-
The power cord should be connected.
-
Connect the video cable from the monitor to the video card.
-
Press the power button to turn on the monitor, the power indicator will light up.
3.2 Control Buttons
Power Press to turn on or turn off the monitor.
Source (4 : 3 or wide) / Up Press key to change the screen aspect ratio between standard 4:3 format or Wide
format.
Source hot key : When the OSD is closed, press button will be Source hot key function (Only for the models with
dual or more inputs) .Press Source button continuously to select the input source
showed in the message bar , press Menu/Enter button to change to the source
selected.
Auto / Down Auto configure hot key: When the OSD is closed, press Auto button to do auto configure.
3.3 Adjusting the Picture
1) Press the MENU-button to activate the OSD window.
2) Press ∧ or ∨ to navigate through the functions. Once the desired function is highlighted, press the MENU-button
to activate sub-menu . Once the desired function is highlighted, press MENU-button to activate it.
3) Press
∧
or
∨
to change the settings of the selected function. Press
∧
or
∨
to select another function in
sub-menu .
Press
AUTO to exit . If you want to adjust any other function, repeat steps 2-3.
4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press
power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is
off and then press power button to turn the monitor on.