AOC E2775SJ User Manual Download Page 59

 

Warranty Statement for North & South America (excluding Brazil) 

WARRANTY STATEMENT     

for AOC Color Monitors 

Including those Sold within North America as Specified 

 

Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of 

three (3) years for parts & labor and one (1) year for CRT Tube or LCD Panel after the original date of consumer 

purchase. During this period, EPI ( EPI is the abbreviation of Envision Peripherals, Inc. ) will, at its option, either 

repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except 

as *stated below. The parts or product that are replaced become the property of EPI. 

 

In the USA to obtain service under this limited warranty, call EPI for the name of the Authorized Service Center 

closest to your area. Deliver the product freight pre-paid, along with the dated proof of purchase, to the EPI 

Authorized Service Center. If you cannot deliver the product in person: 

 

Pack it in its original shipping container (or equivalent)   

Put the RMA number on the address label   

Put the RMA number on the shipping carton   

Insure it (or assume the risk of loss/damage during shipment)   

Pay all shipping charges   

 

EPI is not responsible for damage to inbound product that was not properly packaged. 

EPI will pay the return shipment charges within one of the countries specified within this warranty statement. EPI is 

not responsible for any costs associated with the transportation of product across international borders. This 

includes the international borders of the countries within this warranty statements. 

 

In the United States and Canada contact your Dealer or EPI Customer Service, RMA Department at the toll free 

number (888) 662-9888. Or you can request an RMA Number online at www.aoc.com/na-warranty. 

 

* This limited warranty does not cover any losses or damages that occur as a result of:   

 

Shipping or improper installation or maintenance   

Misuse   

Neglect   

Any cause other than ordinary commercial or industrial application   

Adjustment by non-authorized source   

Repair, modification, or installation of options or parts by anyone other than an EPI Authorized Service Center   

Improper environment   

Excessive or inadequate heating or air conditioning or electrical power failures, surges, or other irregularities   

 

This three-year limited warranty does not cover any of the product's firmware or hardware that you or any third 

party have modified or altered; you bear the sole responsibility and liability for any such modification or alteration. 

 

 

59 

Summary of Contents for E2775SJ































































Reviews: