AOC E2460PDA, Service Manual, Page: 9 / 66

Service Manual E2460PDA
9
2.5 Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before
this procedure. Follow these steps:
1. Remove the base.
2. Follow the manufacturer's instructions to assemble the wall mounting arm.
3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in
the back of the monitor.
4. Insert the 4 screws into the holes and tighten.
5. Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for
instructions on attaching it to the wall.
Note : VESA mounting screw holes are not available for all models, please check with the dealer or official
department of AOC.
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn