background image

6

 

3. Operating Instructions 

3.1 General Instructions 

Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor 

(See Figure ). By changing these settings, the picture can be adjusted to your personal preferences. 

* The power cord should be connected. 

* Press the power button to turn on the monitor. The power indicator will light up.

 

3.2 Control Buttons and Connections 

 

 

Power   

Press the Power button to turn on/off the monitor. 

Eco (DCR)/ - 

Press the Eco key continuously to select the Eco mode of brightness and DCR on when there is no OSD. ( Eco 

mode hot key may not be available in all models). 

Volume /+

 

When there is no OSD,Press Volume button to active volume adjustment bar,Press - or + to adjust volume(Only for 

the models with speakers) 

Auto / Exit

 

When there is no OSD, press Auto/Source button continuously about 

second to do auto configure .

 

Source hot key 

When the OSD is closed, press Source button will be Source hot key function. Press Source button continuously to 

select the input source showed in the message bar , press Menu/Enter button to change to the source selected.

 

 

 

 

 

 

 

 

 

Summary of Contents for e2050Sdak






























































Reviews: