AOC A2258PW, User Manual, Page: 34 / 52

32
Windows 2000
1. Start Windows® 2000.
2. Click on the “
Start ” button, point to “ Settings ”, and then click on “ Control Panel ”.
3. Double click on the “ Display ” Icon.
4. Select the “ Settings ” tab then click on “ Advanced... ”.
5. Select “ Monitor ”
- If the “ Properties ” button is inactive, it means your monitor is properly configured. Please
stop installation.
- If the “
Properties
” button is active. Click on “
Properties
” button. Please follow the steps
given below.
6. Click on “ Driver ” and then click on “ Update Driver... ” then click on the “ Next ” button.
7. Select “ Display a list of the known drivers for this device so that I can choose a
specific driver
”, then click on “
Next
” and then click on “
Have disk...
”.
8. Click on the “
Browse...
” button then select the appropriate drive F: (CD-ROM Drive).
9. Click on the “ Open ” button, then click on the “ OK ” button.
10. Select your monitor model and click on the “ Next ” button.
11. Click on the “ Finish ” button then the “ Close ” button.
If you can see the “ Digital Signature Not Found ” window, click on the “ Yes ” button.
Windows ME
1. Start Windows® Me
2. Click on the “
Start ” button, point to “ Settings ”, and then click on “ Control Panel ”.
3. Double click on the “
Display
” Icon.
4. Select the “
Settings
” tab then click on “
Advanced...
”.
5. Select the “
Monitor
” button, then click on “
Change...
” button.
6. Select “
Specify the location of the driver (Advanced)
” and click on the “
Next
” button.
7. Select “
Display a list of all the drivers in a specific location, so you can choose the
driver you want ”, then click on “ Next ” and then click on “ Have Disk... ”.
8. Click on the “ Browse... ” button, select the appropriate drive F: (CD-ROM Drive) then click on
the “
OK
” button.
9. Click on the “
OK
” button, select your monitor model and click on the “
Next
” button.
10. Click on “
Finish
” button then the “
Close
” button.