AOC 173P User Manual Download Page 5

SPECIAL NOTES ON LCD MONITORS

 

 

The following symptoms are normal with LCD monitor and do not indicate a 
problem. 

 

 

NOTES 

 

  Due to the nature of the fluorescent light, the screen may flicker during 

initial use. Turn off the Power Switch and then turn it on again to make 
sure the flicker disappears. 

  You may find slightly uneven brightness on the screen depending on the 

desktop pattern you use. 

  The LCD screen has effective pixels of 99.99% or more. It may include 

blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the 
time. 

  Due to the nature of the LCD screen, an afterimage of the previous screen 

may remain after switching the image when the same image has been 
displayed for a long time.  The monitor will slowly recover from this. 

 

BEFORE YOU OPERATE THE MONITOR 

 

FEATURES 

 

 

  43.2cm(17”) TFT Color LCD Monitor 

  Crisp, Clear Display for Windows 

 

Recommened Resolutions: 1280 X 1024 @60Hz

 

  Dual Input (DVI + Analog) 

  Space Saving, Compact Case Design 

 

CHECKING THE CONTENTS OF THE PACKAGE

 

   
The product package should include the following items: 

 

1. LCD 

Monitor 

2. Owner's 

Manual 

3.  Power Cord  
4. D-Sub 

Cable 

5. DVI 

Cable 

6. External 

Adapter 

 

4

Summary of Contents for 173P





















Reviews: