AOC 16T2 User Manual Download Page 14

 

 

14 

Type C function working status for charge: 

Charging status:      (Type C 1=TC1, Type C 2=TC2) 

TC1 and TC2 support PD adaptor CC profile 5V/3A input. 

 

When TC 1 and TC 2 both are insert adaptor that will select one port to charge who is first insert. 

 

TC 1(TC 2) insert adaptor and TC 2 (TC 1) connection to mobile phone or tablet, the status will be monitor and 

mobile phone or tablet both are charged. 

 

When (TC1 or TC2) insert adaptor and another side (TC1 or TC2) connector mobile phone or tablet that will output 

5V/500mA (maximum) to charging mobile phone or tablet. 

Ps. 1.support Notebook to monitor charging, not support monitor to Notebook charging. 

2.Charge phone or tablet need push battery voltage display key 3~5 second switch on charge function.

 

TC1/TC2 

Adaptor 

Phone/Tablet 

NB 

NA 

Adaptor 

Plug & Play System 

charging

 

TC1 Signal and System 
charging 
TC2 System charging

 

TC1 Signal/System 
charging 
TC2 System charging 

TC2 System 
charging 

Phone/Tablet 

TC1 System charging 

TC2 Signal/Charging

 

TC1/TC2 Signal and System 
charging 

TC1 Signal/System 
charging 

TC2 Signal and System 
charging 

TC2 Signal and 
System charging 

NB 

TC1 System charging 

TC2 Signal/System 

Charging

 

TC1 Signal and System 
charging 
TC2 Signal/System charging 

TC1 Signal/System 
charging 
TC2 Signal/System 
charging 

TC2 Signal and 
System charging 

NA 

TC1 System charging

 

TC1 Signal and System 
charging 

TC1 Signal/System 
charging 

NA 

 

Power bank mode: 

When push    long time (3~5 second) and connection the phone/tablet 

TC1 and TC2 output 5V/500mA(maximum) 

 

WARNING

: 16T2 default is the state of being charged, reverse to the mobile phone charging will have compatibility 

problems not fully support all mobile phones. 

Suggest to charge the mobile phone in DC ON state. 

 

Push battery voltage display once will show battery status on LED. 

Battery capacity 0%~5% show RED color. 

Battery capacity 5%~50% show ORANGE color. 

Battery capacity 50%~75% show YELLOW color. 

Battery capacity 75%~100% show GREEN color. 

Power bank mode only support Type C USB C PD device.       

 

NOTE: 

16T2 needs to be charged for 8 hours when first time use. Normally charging with accessory adaptor for 5 to 6 hours 

can reach its full capacity. 

Summary of Contents for 16T2


























Reviews: