Aobost AO-CA70 Plus User Manual Download Page 6

 

 

6

 

/

 

10

 

 

and send to the indoor antenna hereafter. If the distance between outdoor antenna 

and indoor antenna is less than the required distance, the amplified signal 

R

 will go 

back from indoor antenna to outdoor antenna. So it will lead to self-oscillation and 

reduce the coverage area, also the bad calling quality could happen at the same time, 

and the worse is that the mobile network could be influenced badly and the operators 

will finally come to shut off the booster system.   

 

 

 

 

If isolation can’t be achieved by the limited distance, the roof of the building or any 

other barriers can be used in between to increase isolation.   

 

Fix the donor antenna after selecting the best position, and adjust slightly its height 

or angles in order to get the signals with suitable input power level and calling 

quality. 

WARNING:

 

The Outdoor Antennas for fixed installations must be installed no higher than 10 meters above 

ground. 

 

2

Installation of Indoor Antenna 

 

  Proper antennas shall be selected according to the site conditions and the 

requirement.  

  Omni antenna (Indoor ceiling omni antenna or whip antenna), is suitable to be 

installed in the center and radiate all directions. 

  Indoor antenna must be operated at a fixed location inside a building, it is better to 

use a directional panel antenna when the coverage building is long and narrow. 

Connect

 the indoor antenna to the booster connector marked 

INDOOR 

with 5 meters 

Summary of Contents for AO-CA70 Plus











Reviews: