2
2
INSTALLATION INSTRUCTIONS
Apply to the below style of LED Backlit Mirror
Please read carefully and save these instructions.
Don’t discard any of the packaging until you are sure that you have all of the parts and the fittings.
Make sure power to the junction box is off before commencing installation.
IMPORTANT
Unpack mirror. DO NOT lay mirror on tiled or concrete surface prior to installation.
Mirror must be on protected surface to prevent chipping of the corners.
Care must be taken before drilling pilot holes to avoid any existing wiring or pipe work that may
be concealed.
A certified electrician must perform all work. The mirror must be connected to a GFI.
The anti-fog mat operates only when the LED light is turn on by the touch sensor.
INSTALLATION
Please refer the installation diagram on the back of thepage.
1)
Unpack
the
LED
mirror
and
prepare
tools
needed.(
See
Pic.1
)
2)
Make
sure
the
measurement
on
the
carboard
screw
holes
are
matching
up
with
aluminum
base
on
the
mirror
back,
then
mark
the
screw
holes
according
from
the
carboard
with
pencil.(See
Pic.2)
3)
Drill
holes,
and
put
in
the
plastic
plugs,
then
fix
the
aluminum
bar
by
screws
and
twisting
the
T
shape
nail
to
the
wall.(See
Pic.3&Pic.4);
4) Connect hardwire to power line. Make sure the power off.(See Pic.5);
5)
Hanging
the
LED
mirror
with
aluminum
bar
and
lock
it
with
the
anti-pull
iron
sheet
by
using
the
spanner
provided
at
the
fittings
bag.(See
Pic.5&Pic.6)
FUNCTION DESCRIPTION
Touch
sensor
switch:
Turn
the
light
and
anti-fog
function
by
the
dimmable
sensor
switch,
see
details
as
below:
Button:
a) Touch the button for LED light and anti-fog control;
b) Long press for color tempereture control, 3000K~6000K adjusting. It will change gradually
(3000K~6000K); level(warm yellow 3000K-warm white 4000K-cold white 6000K) .
Wipe
clean
with
a
soft
damp
cloth.
Apply
glass
cleaner
to
cloth
and
do
not
apply
directly
to
mirror.
Never
use
abrasive
cleaners
as
these
could
damage
the
finish
or
exposed
LED
strips.
MAINTENANCE
