Anzhong Power YAG AZ-HJ-150, Operation Manual, Page: 11 / 35

YAG Pulse Laser Power Supply For Welding System 150W/300W/600W Operation Manual
Shenzhen Anzhong Power Co., Ltd http://www.szazdq.com
- 11 -
Chapter
Ⅵ
LCD Touch Screen Introduction
6.1 Startup Introduction
After turning on the device,the touch-screen will enter self-checking interface,which is usually
contains the following,

Memory

Battery voltage

Safety switch (E-stop,case,xenon lamp exchange cover)

Flow

Shutter

EEPROM module

Time module

Energy detector

Please turn on the key switch when you see the words”please unlock”.(Users set the key
switch by yourself),please see the following picture
：
6.2 Main Menu
After turning on the key switch ,self-checking is activated. After 3-5 seconds for
self-checking,the screen will directly display the "Menu" interface. If the self-checking fails,the
screen will display the corresponding error message. Users can adjust equipment according to the
messages ,then start up again,please see the following picture
：