Step 3:
Power Adapter Setup
1.
Remove basket by pulling forward first,
then pull upward.
3.
If your device power adapters are “brick”
style, feed power cables thru holes on
bottom & add up to 6 adapters per basket.
4.
Hook basket(s) back in place & plug
power cables into outlets.
5.
Feed 6 device cables thru each slot.
6.
Working up front, weave device cables
into divider tabs.
2.
If your device power adapters are “wall wart”
style, plug into outlets & skip to step 5.
In
Timer
Mode, 1 LED illuminates at a time for 5 min.
In
ON
Mode, 4 LED illuminate at the same time.
Step 4:
Timer Operation