ACT-5X Exciter User Manual
Version 3.0 05/07/2015
Page 5 of 26
1.2
Back Panel
RF_IN_A:
Feedback signal, sampled after the band-pass filter (-5 to -15dBm)
RF_IN_B:
Feedback signal, sampled before the band-pass filter (-5 to -15dBm)
AGC_IN:
Feedback DC voltage for AGC control (0-5VDC)
RF_MON:
Loop out of [RF_OUT] for monitoring (-25 dB below RF_OUT)
RF_OUT:
Main RF signal output N-type female (nominal 0 dBm output)
DRYLOOP (RS232): Dry loop for remote control
REMOTE (RS232):
Serial port for remote control
REMOTE (RJ45-B):
10M/100M Ethernet for remote control
TSoIP (RJ45-A):
Reserved
10M_IN:
10 MHz input from external GPS receiver
1PPS:
1 PPS input from external GPS receiver
TS_IN_1:
The first port of TS inputs, DVB-ASI only
TS_OUT_1:
Loop out of [TS_IN_1] for monitoring
TS_IN_2:
The second port of TS inputs, DVB-ASI only
TS_OUT_2:
Loop out of [TS_IN_2] for monitoring
TUNER_IN:
Received RF signal input, N-type female
