Anyty 3R-HSA670BT, User Manual

Page: 45 / 48

4.
4. 4.
4.9
9 9
9 Ca
Ca Ca
Calibrating your scanner
librating your scanner librating your scanner
librating your scanner
Note: Perform calibration only when white balance needs adjustment.
1. Turn on the scanner by sliding the [POWER] button to ON. Then place the
scanner on the provided
“
White Balance Calibration
”
paper.
2. Click and hold onto the [STITCH FILE] button. While holding onto the
[STITCH FILE] button, press the [SCAN] button once and then release both
bottons. SD symbol will flash and
“ GREEN ” and “ RED ” LED light will
turn on.
3. Do not move the scanner. Wait until the “ RED ” LED light turns off.
“ GREEN ” LED light will stay on.
4. With only the “ GREEN ” LED light on, start scanning the white paper by
sliding the scanner across the paper until the “ GREEN ” LED light turns off.
(Slide the scanner backwards if necessary).
5. Slide the [POWER] button to OFF to turn off the scanner. Calibration is
complete.
5.
LED light indications
LED light indications LED light indications
LED light indications
LED
LED LED
LED
“
GREEN ” SCAN LED ON Scan in progress.
“GREEN
”
SCAN LED OFF Standby / Scan is complete.
-------------------------------------------------------------------
LED LED LED LED
“RED ” ERROR LED ON Scanning too fast.
May cause scanning error.
Restart and scan again.
“RED ” ERROR LED OFF No error in scanning speed.
Continue scanning process.
-------------------------------------------------------------------
LED LED LED LED
“WHITE ” SF LED ON/OFF A new folder created.
LED LED LED LED
“BLUE ” BT LED ON/OFF Bluetooth is workong