
7. MAIN MENU FUNCTIONS
26
Digital DMR and Analog UHF/VHF Two Way Radio
Adjusts the squelch level to receive signal with different signal strength,
and a total of 5 levels offered. This function is only valid for analog channel.
(28)
Power Save
Turn on the function to extend the battery life.
Save 1:1, work 30ms, dormant 30ms.
Save 2:1, work 60ms, dormant 30ms
When turn on the power save, it may not receive the message in time.
(29)
TBST Sel
TBST frequency is used to activate some dormant repeaters, 1000Hz,
1450Hz,1750Hz, 2100Hz a total of 4 options are offered.
Press PTT and PF1 key together to transmit the TBST tone.
(30)
VOX
Enable the VOX, you can speak into the microphone to start transmitting
instead of pressing the [PTT] key. A total of 3 levels are provided.
(31)
VOX Delay
When the VOX is enabled, set up the VOX delay to help to extend the
transmission time to avoid stopping a transmission too early. 0.5s-3s, a
total of 26 times offered.
(32)
Scan Mod
SCM TO:
When scanning and stopping for a signal, stays at the channel
5s before resuming the scan.
SCM CO:
When scanning and stopping for signal, stays at the channel
until the signal disappears, and resumes scan 2s later.
SCM SE:
When scanning and stopping for a signal, will terminate the scan.
This function is only valid for a VFO scan.
(33)
Mic Level
Allows to adjust the Microphone gain, level 1 is the lowest, level and 5 is
highest gain.
(34)
Fix Time Mute
With the
“
FixTime Mute
”
function activated
(On)
it is possible
to mute the
loudspeaker
for a
wished time segment.
The
duration of the “Mute Time” may be set by the
CPS ->Optional
Setting->Other->Mute Timing.