21
AT-778UV UHF/VHF Two Way Radio
1.
Hold [FUNC] key to enter SELECT MENU interface.
2.
Short press [P4] key, [P6] key or turn channel knob to choose menu list. Short press [P5]
key can fast turn page.
3.
Press [PUSH] button to enter CHAN MENU list
4.
Short press [P4],[P6] key or turn channel knob to choose wanted setting
8. CHANNEL MENU
1.
Enter CHAN MENU, choose No.1 function
2.
Press [PUSH] button, the menu value in LCD turns to green color.
3.
Turn channel knob to choose wanted setting
OFF: Turn off CTCSS/DCS decode.
CTCSS: Choose CTCSS decode.
DCS: Choose DCS decode.
4.
When choose CTCSS/DCS decode, press [PUSH] button to enter CTCSS/DCS decode
setup, then turn channel knob to choose wanted CTCSS/DCS decode.
&7&66+]DQGRQHVHOIGH¿QHJURXSWRWDOJURXSV
DCS: 000N-777I, total 1024 groups
N is positive code, I is inverse code.
Press [FUNC] key can choose positive or inverse code
5.
3UHVV>386+@EXWWRQRU>3@NH\WRVWRUHVHWWLQJDQGH[LW
1.
Enter CHAN MENU, choose No.2 function
2.
Press [PUSH] button, the menu value in LCD turns to green color.
3.
Turn channel knob to choose wanted setting.
OFF: Turn off CTCSS/DCS encode.
CTCSS: Choose CTCSS encode.
DCS: Choose DCS encode.
4.
When choose CTCSS/DCS encode, press (PUSH) button to enter CTCSS/DCS
encode setup, then turn channel knob to choose wanted CTCSS/DCS encode.
&7&66+=DQGRQHVHOIGH¿QHJURXSWRWDOJURXSV
DCS: 000N-777I, total 1024 groups
N
is positive code,
I
is inverse code.
5.
3UHVV>386+@EXWWRQRU>3@NH\WRVWRUHVHWWLQJDQGH[LW
1.
(QWHU&+$10(18FKRRVH1RIXQFWLRQ
2.
Press [PUSH] button, the menu value in LCD turns to green color
8.1 RCDT (CTCSS/DCS Decode Setup)
8.2 CTCSS/DCS Encode Setup
8.3 HIGH/MID/LOW Power Selection
»
7KHZRUNLQJRI&7&66'&6GHFRGHVKDOOEHZRUNDVVRFLDWHGZLWKWKHVTXHOFK
mode setup. (Refer to Signaling Combination setup in page 21).
