AnyTone AT-7100, User Manual

Page: 11 / 20

6
7
GETTING ACQUAINTED
BS: Donor antenna
MS: Service antenna
GSM :uplink gain adjustment switch
DCS: uplink gain adjustment switch
3G/UMTS/WCDMA: uplink gain
adjustment switch
GSM: downlink gain adjustment switch
DCS:
downlink gain adjustment switch
3G/UMTS/WCDMA: downlink gain
adjustment switch
GSM: uplink signal indicating light
DCS: uplink signal indicating light
3G/UMTS/WCDMA: uplink signal
indicating light
GSM: downlink signal indicating light
DCS: downlink signal indicating light
3G/UMTS/WCDMA: downlink signal
indicating light
Attention:
Just one band is occupied when cell phone is working, therefore, in
general usage of tri band repeater, only downlink and occupied band for uplink
indicating light illuminate.
S w i t c h m o v i n g u p a s 1 m a k e s g a i n
attenuation, while switch moving down as 0
makes gain remain original. Factory default
setting: all switch down. For example,
when switch 1 and switch 4move up, the
corresponding truth table attenuates 9dB.
When BS connection port receives GSM/
DCS/3G signal which surpasses-50dBm,
indicating light lightens or twinkles. Now
the device receives well and it's able to
communicate normally.
When BS connection port receives GSM/
DCS/3G signal with surpasses -60dBm,
indicating light shows in Green. Now
the device receives well and it's able to
communicate normally.When system internal
self-excitation, the indicating light from Green
to Orange, to overcome the self-excitation
please reference to common problems.
1
2
3
4
5
6
7
8
9
10
11
12
13
14