AnyTone AT-6666, User Manual

Page: 5 / 13

2
INSTALLATION
Choose the most appropriate setting from a simple and practical point of
view. Your radio should not interfere with the driver or crash the driver's
knee or leg when rush brake.
Using the self-tapping screws and pads(2 sets) to fix the bracket. 11
Put the Non-slip mat on the 2 ends of the bracket and put in the 21
radio.Then insert the adjusting screws and check carefull each
screws, make sure the screws and machine will not loose when the
car shaking.
Choose suitable angle by the 3 screw holes in the two ends of 31
bracket.
ANTENNA INSTALLATION
POWER CONNECTION
Before using this radio, please install a high efficent and harmonious
adjusted CB antenna, suitable antenna type and correct installation
will bring excellent communication.
To match with the radio, the antenna and cable shall with
characteristic impedance of 50ohm, or the antenna system will not
efficient enough and will disturb TV, radio or other electronics.
This radio adopt 13.8V power supply, never connect it to 24V battery,
And the 13.8V car battery shall with sufficient current, or the LCD will
become dark and Transmit power will drop down.
Connect positive red power cable with the + terminal of the battery. 11
Connect negative black power cable with the - terminal of the 21
battery.
Screw the antenna connector into the antenna jack. 11
Grounding the antenna system to ensure best performance of 21
this radio.
WARNING:
▲ Connect antenna firstly before transmiting, or it might damage the
radio.
▲ To avoid the risk of fire, electric shock, radio damage, all base
station shall equip of lightning protector
▲ Be sure choose a matching antenna, you may enquiry our dealers.
▲ We suggest not use cigar lighter as it often bring down the voltage.
▲ Locate the power cable away from high temperature,moisture,
portfire and cable insulator.
▲ Use a full power cable even it is longer than need, do not take off
the fuse holder from the cable.
The position of antenna can be put as following example: 31