Professional
FM Transceiver
13
BASIC OPERATIONS
Receiving
You can hear the transmitting party's calling when the channel you are operating is called and the
LED light turns green.
NOTE:
You may not receive the calling if you set a high squelch off level of the transceiver.
If current channel has been programmed with signaling, you can only hear the call from a same
signaling, other calls can not be heard.
Transmitting
Before transmitting, make sure that the channel you want to use is not in busy state through
monitoring for a while by pressing the programmed Squelch off [
PF1
] / [
PF2
] key. Under these
conditions, press the [
PTT
] key and speak into microphone. Please keep around 2.5-5cm distance
between microphone and your lip. And please speak in normal tone to make the receiver obtain best
tone quality.
Note:Press PTT, Red LED lighting means transmitting .Release PTT to receive signal.
